Shure Beta 87A Vocal Microphone - The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. 　 The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production. The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the “boomy” sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.

Applications

DJ Commercial Audio Pro Audio Pro Recording

Features

- Smooth frequency response with gradual presence rise. - Highly consistent supercardioid polar pattern provides superior gain-before-feedback. - Electronic low-frequency roll-off compensates for proximity effect. - Wide dynamic range (117 dB) and low distortion characteristics. - Very low susceptibility to RFI and electromagnetic hum. - Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise. - Built-in pop filter reduces undesirable wind and breath sounds. - Legendary Shure quality and reliability.

Details

Model Beta 87A Product Type Vocal Microphone Cartridge Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Polar Pattern Supercardioid Output Impedance Rated at 150 ohms (100 ohms actual +/- 20%), Recommended minimum load impedance: 800 ohms Sensitivity (at 1,000 Hz) Open Circuit Voltage -52.5 dBV/Pa (2 mV) Clipping Level (at 1,000 Hz) 1000 ohm Load: -6 dBV (0.5 V) Maximum SPL (at 1,000 Hz) 140.5 dB (0.25% THD, 1000 ohm load) Self-Noise 23.5 dB typical, A-weighted; 25.5 dB typical, weighted per DIN 45 405 Dynamic Range 117 dB (maximum SPL to A-weighted noise level) Signal-to-Noise Ratio 70.5 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 Power Specifications Phantom Supply Requirement 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain 1.0 to 1.2 mA Connector Three-pin (XLR) professional audio Net Weight 207 Grams (7.6 oz)